In situ Measurement of the Adhesion Strength and Effective Elastic Stiffness of Single Soft Micropillar

We report the deformation behavior and mechanical properties of a polymeric micropillar, which measures approximately 10 μm by 30 μm in size by measuring the loading/unloading response using an in situ force measurement system. When the single poly(dimethylsiloxane) (PDMS) micropillar was subjected to compression, we observed a periodic wrinkle and global (Euler) buckling at the sidewall. During unloading, we found the pull-off force (adhesion force) to increase for higher values of preloading and also for lower loading/unloading rates. From the slope of the load–displacement curves measured in situ, we calculated the effective elastic stiffness of the PDMS micropillar to be about 2.03 MPa. In addition to the current work, we report that this method can be used more broadly for in situ measurement of the intrinsic mechanical and adhesion properties of polymers and other relatively soft materials.     

Preparation and characterisation of an easily absorbabl Mg‐casein hydrolysate complex produced through enzymatic hydrolysis and ultrafiltration

In this study, we synthesised a Mg‐casein hydrolysate complex that allowed the effective absorption of Mg. The type of enzyme (papain, alcalase 2.4 L, pepsin, trypsin) and the enzyme/substrate ratio for casein hydrolysis was optimised. When the enzyme/substrate ratio was 30%, the alcalase 2.4 L‐hydrolysate showed the highest Mg‐chelation efficiency, of 96.1%. To characterise and enhance the function of casein hydrolysate, we fractionated the casein hydrolysate according to molecular weight using ultrafiltration. The Mg‐chelation efficiency was increased with the decrease in the molecular‐weight range of the hydrolysate fractions. The smallest casein hydrolysate (fraction 5, 1 kDa<) is used for preparation of Mg‐casein hydrolysate complex. Synthesised Mg‐casein hydrolysate complex (fraction 5) exhibited 100% Mg solubility and 39.5% Mg bioavailability. These results indicated that the Mg‐casein hydrolysate remained a stable chelate during simulated gastro‐intestinal digestion in vitro. The Mg‐casein hydrolysate complex exhibited excellent antioxidant activity as well as Mg binding.     

Pressure drop and optimization meta-models for arbitrary low-height pleated filter shapes and flowrates

Journal of Mechanical Science and Technology - This study delivers equations useful for low-height pleated fibrous filter design: two pressure drop equations and one set of optimum design equations...     

Humidifier disinfectant and use characteristics associated with lung injury in Korea

Since around the year 2000, hundreds of people in Korea have developed humidifier disinfectant‐associated lung injury (HDLI). We collected all HD exposure‐related information from the field investigations into the locations in which the 1199 registered patients had used HD. Among the people who registered, 38% (1st round = 214, 2nd = 73, 3rd = 166) were confirmed as HDLI patients. Children aged under eight years old made up the highest proportion of HDLI cases (N = 279, 62%), followed by pregnant women (N = 31, 7%). One hundred thirty‐three (29%) of the confirmed HDLI patients died. Fifty‐seven percent of HDLI patients (N = 259) developed HDLI after <1 year of HD use. The number of HDLI patients who used only the Oxy Saksak HD brand was found to be 176 (39%), followed by the brands Cefu (N = 27, 6%) and Aekyung (N = 22, 5%). HD products containing only polyhexamethylene guanidine phosphate (PHMG‐P) were the most frequently used among HDLI patients (N = 234, 52%), followed by oligo (2‐(2‐ethoxy)ethoxyethyl) guanidinium (PGH) (N = 27, 6%) and a mixture of chloromethylisothiazolinone (CMIT) and methylisothiazolinone (MIT) (N = 26, 6%). The average PHMG‐P inhalation level estimated from the patient group classified as suffering lung injury definitely associated with HD use was 145.1 μg/m³ (N = 91, SD = 395.1 μg/m³), higher than levels estimated from both the probable and possible HDLI patient groups. In conclusion, HD exposure‐related variables, including type of HD brand and estimated inhalation HD level, were associated with the risk of HDLI.     

A Self-Healing Nanofiber-Based Self-Responsive Time-Temperature Indicator for Securing a Cold-Supply Chain

Perishable foods at undesired temperatures can generate foodborne illnesses that present significant societal costs. To certify refrigeration succession in a food-supply chain, a flexible, easy-to-interpret, damage-tolerant, and sensitive time-temperature indicator (TTI) that uses a self-healing nanofiber mat is devised. This mat is opaque when refrigerated due to nanofiber-induced light scattering, but becomes irreversibly transparent at room temperature through self-healing-induced interfibrillar fusion leading to the appearance of a warning sign. The mat monitors both freezer (−20 °C) and chiller (2 °C) successions and its timer is tunable over the 0.5–22.5 h range through control of the polymer composition and film thickness. The thin mat itself serves as both a temperature sensor and display; it does not require modularization, accurately measures localized or gradient heat, and functions even after crushing, cutting, and when weight-loaded in a manner that existing TTIs cannot. It also contains no drainable chemicals and is attachable to various shapes because it operates through an intrinsic physical response.     

Gui-A-Gra Attenuates Testicular Dysfunction in Varicocele-Induced Rats via Oxidative Stress,ER Stress and Mitochondrial Apoptosis Pathway

Gui-A-Gra, a commercial insect powder from Gryllus bimaculatus, is registered as an edible insect by the Korean food and drug administration. The aim of this study was to investigate the effect of Gui-A-Gra on testicular damage induced by experimental left varicocele in male Sprague Dawley rats. A total of 72 rats were randomly divided into the following six groups (12 rats in each group): a normal control group (CTR), a group administrated with Gui-A-Gra 1.63 gm/kg (G1.63), a group administrated with Gui-A-Gra 6.5 gm/kg (G6.5), a varicocele (VC)-induced control group (VC), a VC-induced group administrated with Gui-A-Gra 1.63 gm/kg (VC + G1.63), and a VC-induced group administrated with Gui-A-Gra 6.5 gm/kg (VC + G6.5). Rats were administrated 1.63 or 6.5 gm/kg Gui-A-Gra once daily for 42 days. Indicators of sperm parameters, histopathology, reproductive hormones, oxidative stress, endoplasmic reticulum (ER) stress, inflammation, and mitochondrial apoptosis were analyzed to evaluate effects of Gui-A-Gra on VC-induced testicular dysfunction. Gui-A-Gra administration to VC-induced rats significantly (p < 0.05) increased sperm count and sperm motility, Johnsen score, spermatogenic cell density, serum testosterone, testicular superoxide dismutase (SOD), glutathione peroxidase (GPx), catalase, GPx4, and steroidogenic acute regulatory protein (StAR) level. Moreover, pretreatment with Gui-A-Gra significantly (p < 0.05) decreased terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling (TUNEL) positive cells/tubules, serum luteinizing hormone (LH), serum follicle-stimulating hormone (FSH), testicular tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6), malondialdehyde (MDA), reactive oxygen species (ROS)/reactive nitrogen species (RNS) level, glucose-regulated protein-78 (Grp-78), phosphorylated c-Jun-N-terminal kinase (p-JNK), phosphorylated inositol-requiring transmembrane kinase/endoribonuclease 1α (p-IRE1α), cleaved caspase-3, and BCL2 associated X protein: B-cell lymphoma 2 (Bax: Bcl2) ratio in VC rats. These results suggest that protective effects of Gui-A-Gra on VC-induced testicular injury might be due to its antioxidant, anti-inflammatory, and androgenic activities that might be mediated via crosstalk of oxidative stress, ER stress, and mitochondrial apoptosis pathway.     

Removal and repair techniques for thermal barrier coatings: a review

ABSTRACT

A comprehensive literature review of the existing techniques for removing and repairing of damaged thermal barrier coatings is presented, with the focus on top ceramic coats. The advantages and disadvantages of each technique are compared and assessed. The review shows that there is not a universal method applicable to all coating systems. The selection of the coating removal and repair process must be specific to damaged coating systems, based on their composition, type of damages, and available resources. This review will provide some inside look at various approaches in an effort to meet the different coating repair needs.